Multi-purpose polyurethane windshield adhesive for repairing

1. Popular repair adhesive 2. Polyurethane windshield adhesive 3. Multi-purpose polyurethane adhesive

Features:

   One-component formulation polyurethane windshield adhesive 

   Safe Drive Away Time in as little as two hours when used on vehicles with airbag.

   Modest Hardness after curing. Flexible, durable and excellent extrudability.

   Need no primer to glass polyurethane windshield adhesive

   No sagging, no pollution and corrosion to base material and environment.

   Excellent sealing performance, excellent water and aging resistance.

Data table

 

Testing Items	Performance
Appearance	Black
Density  (g/cm³)	1.35±0.05
Sagging propertise(mm)	0
Shore A-hardness(A°)	61±3
Tensile strength( Mpa)	≥4.0
Elongation at break (%)	≥350
Volatile content (%)	≤4
Tensile-share strength(Mpa)	≥1.5
Touch Dry time  (min)	10~30
Curing speed   (mm/24h)	3~5
Extrudability   (g/min)	80
Pollution properties	Non
Application temperature  (ºC)	+5~+35
Shelf life(month)	9

USES:

Suitable for automobile windshield and side glass installing.

Suitable for car body structural bonding and sealing.

PACKAGING:

310ml cartridge, 20 pcs/carton

600ml/400ml sausage, 20 pcs/carton

APPLICATION:

Minimum application temperature: 5°C.

PU8630 should be dispensed from either the cartridge or sausage by means of a caulking gun. Pierce the membrane at the top of the cartridge and screw on the nozzle. Cut nozzle to give the required angle and bead size. Place the cartridge in an applicator gun and squeeze the trigger. For sausages, a barrel gun is required, clip the end of the sausage and place in barrel gun. Screw end cap and nozzle on to barrel gun. Using the trigger extrude the sealant, to stop depress using the catch plate. Apply PU8630 in a continuous bead using enough pressure to properly apply the sealant.